Materials

For the best quality print at the most economical price, we recommend using the following materials:

PAPERS:
1) Gloss Paper
2) Matte Litho

DURABLE SYNTHETICS:
1) Matte White Polypropylene
2) White Polyester


DURABLE SYNTHETICS

White Polyester (Permanent All Temp Adhesive) [Stock #2115] This is our most durable white material. 2 mil topcoated glossy white film face stock offering high heat, tear, abrasion, solvent, and water resistance. It features excellent printability with conventional print methods, including thermal transfer when paired with the appropriate ribbon. This material will last a long time outside without yellowing. The adhesive is a clear all temperature permanent pressure sensitive emulsion acrylic adhesive featuring excellent adhesion to a variety of surfaces over a broad temperature range. It has excellent converting characteristics on press. The high initial tack of this adhesive to low surface energy polyolefins makes it an ideal for blow on applications. Temperature Ranges: Labeling Temperature min -10 F [-4 C], Service Temperature Ranges from -65 F [-54 C] to 200 F [93 C]. Use this white material for indoor and outdoor labels or labels that will be used in harsh environments. Examples: candles, durable goods, property identification, asset labels.

White Polyester (Removable Adhesive) [Stock# 705] This is our most durable white material. 2 mil pigmented white semi-gloss film face stock featuring excellent tear strength, heat resistance, dimensional stability, opacity, and chemical resistance. This material will last a long time outside without yellowing. The adhesive is a visually clear acrylic based removable adhesive with versatile performance properties. The adhesive exhibits good adhesion and clean long term removability from most smooth surfaces such as hard plastics, metal, glass, paper, Teflon, textured PVC and corrugated surfaces. The adhesive is a removable adhesive developed to provide good temporary adhesion to a variety of substrates (including cold wet/damp surfaces). We recommend you test this material to make sure adhesive works for your application. Temperature Ranges: Labeling Temperature min +50 F [10 C], Service Temperature Ranges from -40 F [-40 C] to 250 F [121 C].

Use this white material when you need the label to release from the product without leaving a residue and the label will be used indoors or outdoors or in a harsh environment. Examples: durable goods, rating plates, product identification, work in process or other temporary labels.

White Polyester with Layflat Liner (Permanent Adhesive) [Stock# 1948] Same face stock as our 2 mil White Polyester with a 7 mil layflat liner. This material is used for sheeted applications that require the durability of Polyester material and the thick feeling of a vinyl. The liner is thicker, heaver, and lays flat. Material comes with a clear solvent acrylic permanent adhesive with good initial tack to a variety of substrates. Temperature Ranges: Labeling Temperature min +50 F [10 C], Service Temperature Ranges from -40 F [-40 C] to 300 F [149 C].

Use this material for any label that is to be sheeted or individually cut out. Examples: bumper stickers, decals, product labeling.

Clear Polyester (Permanent Adhesive) [Stock# 1657] - This is our most durable clear material. 2 mil clear polyester is a highly transparent film face stock featuring excellent tear strength, heat resistance, waterproof, dimensional stability and chemical resistance. This material will last a long time outside without yellowing. The adhesive is an excellent general-purpose industrial grade clear permanent acrylic adhesive. It features high initial tack to most high and medium surface energy substrates. Looks best when applied to opaque white or light colored backgrounds. Temperature Ranges: Labeling Temperature min +25 F [-4 C], Service Temperature Ranges from -40 F [-40 C] to 300 F [149 C].

Use this clear material if you wish to show the product through the label and the label will be used outdoors or in a harsh environment. Examples: candles, durable goods, product identification, rating plates, work in progress, property identification or asset labels.

Clear Polyester (Repositionable Adhesive) [Stock# 1670] This is our most durable clear material. 2 mil clear polyester is a highly transparent film face stock featuring excellent tear strength, heat resistance, waterproof, dimensional stability and chemical resistance. This material will last a long time outside without yellowing. The adhesive is a repositionable adhesive developed to provide good temporary adhesion to a variety of substrates (including cold wet/damp surfaces). It exhibits good adhesion and clean long term removability from most smooth surfaces such as hard plastics, metal, glass, paper, Teflon, textured PVC and corrugated surfaces. Temperature Ranges: Labeling Temperature min +20 F [-7 C], Service Temperature Ranges from -20 F [-29 C] to 250 F [121 C].

Use this clear material when you need the label to cleanly release from the product without leaving a residue, you need to show product through the label and the label will be used outdoors or in a harsh environment. Examples: mirrors, glass, windows, book covers.

Matte Silver Polyester (Permanent Adhesive) [Stock# 424] - This is our most durable matte silver material. 2 mil matte silver polyester is a good material if you would like your product to stand out from the norm. Silver film face stock featuring excellent tear strength, heat resistance, dimensional stability, opacity, and chemical resistance. This material will last a long time outside without yellowing. Matte silver has a smooth satin silver finish. The adhesive is an excellent general-purpose industrial grade clear permanent acrylic adhesive. It features high initial tack to most substrates. Temperature Ranges: Labeling Temperature min +50 F [10 C], Service Temperature Ranges from -40 F [-40 C] to 302 F [150 C].

Use this material for labels with a matte silver look that can be used outdoors or in harsh environments. Examples: durable goods, power tools, lawn and garden, electronic components, parts identification, inventory control, product identification.

Brushed Silver Polyester (Permanent Adhesive Adhesive) [Stock# 1725] - This is our most durable brushed silver material. 2 mil UL recognized silver brushed polyester is a good material if you would like your product to stand out from the norm. This material will last a long time outside without yellowing. Brushed silver is a satin silver finish with streaks resembling brush marks. Adhesive is a standard permanent adhesive, which offers excellent adhesion to a wide variety of substrates. Temperature Ranges: Labeling Temperature min +40 F [5 C], Service Temperature Ranges from -20 F [-29 C] to 302 F [150 C].

Use this material for labels with a brushed silver look that can be used outdoors or in harsh environments. Examples: nameplates, product identification, durable goods, equipment and machinery, power tools, lawn and garden labels.

Brushed Silver Polyester (Permanent Adhesive) [Stock# 220] - 2.9 mil mirror finish, bright silver metalized paper for indoor use. All colors of ink show up; inks are transparent so entire label will have shine even where area has ink. The adhesive is an all-temperature adhesive developed to provide good room temperature performance and excellent cold temperature performance without sacrificing good diecutting and stripping properties. Because of its cold-temperature properties and good adhesion to corrugated cardboard, this adhesive is an ideal adhesive for warehouse applications. Temperature Ranges: Labeling Temperature min -20 F , Service Temperature Ranges -65 F to 200 F. Use silver foil paper for flash and looks on indoor labels. Examples: applications requiring a deluxe appearance of metalized paper. Markets include: food, cosmetic, toiletries, beverage and more.

Gloss White BOPP (Permanent Adhesive) [Stock #1922] 2.3 mil top coated white gloss polypropylene film. Biaxially oriented with excellent hot/cold moisture resistance, high stiffness for conversion and automatic dispensing. Will perform well in harsh, wet, hot, cold environments. It has a Cold Temperature emulsion acrylic permanent adhesive which exhibits high initial tack and very good adhesion to a variety of substrates including corrugated, rigid plastics, films, glass and painted metal substrates. It is not recommended for long period water immersion. Temperature Ranges: Labeling Temperature min +25 F [-4 C], Service Temperature Ranges from -10 F [-23 C] to 200 F [93 C].

Use this gloss white material for any application where you want your product to resist moisture, chemicals, harsh environments, or a high quality print on a low cost synthetic. Good alternate to white polyester.

Gloss White BOPP (Freezer Adhesive) [Stk #1923] 2.3 mil top coated white gloss polypropylene film. Biaxially oriented with excellent hot/cold moisture resistance, high stiffness for conversion and automatic dispensing. Will perform well in harsh, wet, hot, cold environments. Adhesive exhibits high initial tack and adhesion, even on most textured and hard to label substrates, including corrugated.Temperature Ranges: Labeling Temperature min +25 F [-4 C], Service Temperature Ranges from -65 F [-54 C] to +200 F [93 C].

Use this gloss white material if you need to apply at low temperatures, frozen products, or if your item is being placed into extreme sub temperatures.

Matte White Polypropylene (Permanent Adhesive) [Stock #1791] This 3 mil polypropylene matte white film is used for applications where resistance to water, oil and chemicals is important. Perfect for an application that needs a low cost matte synthetic (polypropylene is half the cost of polyester). Polypropylene is waterproof and durable, but not as durable as polyester. Polypropylene will stretch, but is hard to tear. Polyester will not stretch. The adhesive is clear permanent acrylic dispersion adhesive that resists water and has UV stability. Good initial adhesion properties and heat resistance. Temperature Ranges: Labeling Temperature min +50 F [10 C], Service Temperature Ranges from -4 F [-20 C] to 212 F [100 C].

Use this matte material if you have an indoor application, you are concerned about moisture, need a material that wont tear easily, and is lower cost than polyester. Examples: coffee bags, plastic bags, and water bottles.

Matte White Polypropylene (Repositionable Adhesive) [Stock #1787] 3.2 mil matte white coated polypropylene based film. This material is a matte synthetic but the ink will finish glossy. Perfect for an application that needs a low cost matte synthetic (polypropylene is half the cost of polyester). Polypropylene is waterproof and durable, but not as durable as polyester. Polypropylene will stretch, but is hard to tear. Polyester will not stretch. The repositionable adhesive removes easily like a Post-it note and exhibits good adhesion and clean long term removability from most smooth surfaces such as hard plastics, metal, glass, paper, Teflon, textured PVC and corrugated surfaces. The adhesive is a repositionable adhesive developed to provide good temporary adhesion to a variety of substrates (including cold wet/damp surfaces). We recommend you test this material to make sure adhesive works for your application. Temperature Ranges: Labeling Temperature min +20 F [-7 C], Service Temperature Ranges from -20 F [-29 C] to 250 F [121 C].

Use this matte material when you need the label to cleanly release from the product without leaving a residue and you need a durable low cost solution for a waterproof indoor application. Examples: mirrors, glass, windows, book covers.

PAPERS

Bright White Paper (Permanent Adhesive) [Stock #974] 2.9 mil matte-coated label paper with an ultra smooth coated face material for glossy print. Also thermal transfer printable if not printing over any ink. The adhesive is a modified acrylic dispersion permanent adhesive. Very good adhesion on a wide variety of substrates. Temperature Ranges: Labeling Temperature min 32 F [0 C]. Service Temperature Ranges from -40 F [-40 C] to 200 F [93 C]. Use this material when you need an inexpensive matte facestock that you can Thermal transfer print upon. Good for most indoor product labeling that requires a permanent adhesive but does not require the highest quality of print. Examples: Thermal Transfer label applications or low end 4cp or spot color printing.

Bright White Paper (Removable Adhesive) [Stock #540] 2.9 mil matte-coated label paper with an ultra smooth coated face material for glossy print. Also thermal transfer printable if not printing over any ink. The adhesive is a rubber based removable adhesive with good adhesion to rough surfaces such as corrugated cardboard and for curved substrates such as test tubes. Can also be used as a deep freeze adhesive. Long term removable from smooth, even substrates restricted. Should not be exposed to direct sunlight or high temperatures for long periods of time. ISEGA has given this adhesive approval for direct contact with dry and moist non-fatty foods. We recommend you test this material to make sure adhesive works for your application. Temperature Ranges: Labeling Temperature min 32 F [0 C]. Service Temperature Ranges from -40 F [-40 C] to 200 F [93 C].

Use this material when you need an inexpensive matte facestock, good for most indoor product labeling that requires the label to be removable. Examples: thermal transfer label applications requiring a removable adhesive.

Bright White Paper (Freezer Adhesive) [Stock #1058] - 2.9 mil matte-coated label paper with an ultra smooth coated face material for glossy print. Also thermal transfer printable if not printing over any ink. The adhesive is a modified acrylic dispersion all-temperature/deep freeze adhesive. Should be used when very good adhesion at low temperatures is required. Freezer adhesive is ideal for frozen or refrigerated products. Temperature Ranges: Labeling Temperature min -20 F [-29 C]. Service Temperature Ranges from -65 F [-54 C] to 200 F [93 C].

Use this material when you need an inexpensive indoor matte facestock, are not concerned about moisture, but the product needs to be frozen or refrigerated. Examples: medicine, product labeling.

Bright White Paper (Opaque Adhesive) [Stock# 726] - 3.1 mil thermal transfer premium coated opaque, ultra-smooth, matte-coated label paper with opaque reverse side coating. If not printing over any ink, this material is thermal transfer printable. Adhesive is black, making the label opaque and will block information beneath the label. Adhesive is a permanent acrylic dispersion with good adhesion to all normal substrates, including non-polar surfaces, films and corrugated board. Good low temperature performance. Temperature Ranges: Labeling Temperature min 32 F. Service Temperature Ranges from -4 F [-20 C] to 176 F [80 C].

Use this material for indoor usage to cover up a label beneath for corrections, updates, or new barcodes.

Gloss White Paper (Permanent Adhesive) [Stock #1915] 55 # bright white semi gloss facestock with good opacity and medium gloss level. It has a cold temperature emulsion acrylic permanent adhesive which exhibits good initial tack and good adhesion to a variety of substrates including corrugated, rigid plastics, films, glass and painted metal surfaces.It also features short-term repositionability on bottles. Temperature ranges: Labeling Temperature min +25 F [-4 C], Service Temperature Ranges from -10 F [-23 C] to 200 F [93 C].

Use this material when you need the most inexpensive gloss facestock, good for most indoor product labeling. Examples: product identification, sauces, jellies, dressings.

Matte White Litho Wet-strength (Freezer Adhesive) [Stock# 1789] - 3.3 mil bright white, coated matte paper with added wet strength for improved moisture resistance. Good material for use on wine or drink applications where the material needs to have some resistance from moisture. The adhesive is an all temperature adhesive, which will work well in a room temperature environment or a cold temperature environment. Freezer adhesive is ideal for frozen or refrigerated products. Temperature Ranges: Labeling Temperature min -20 F [-29 C]. Service Temperature Ranges from -65 F [-54 C] to 200 F [93 C].

Use this material when you need an inexpensive indoor matte facestock with greater strength when wet, you are not concerned about moisture, but the product needs to be frozen or refrigerated. Examples: water bottles, juice, wine labeling.

Matte White Litho (Perm Adhesive) [Stock #1900] 4 mil, high quality, dull matte coated premium paper. The rubber-based adhesive features high initial tack and ultimate bond strength to a wide variety of substrates, including low surface energy plastics, treated glass, and corrugated cardboard. Temperature Ranges: Labeling Temperature min 25 F. Service Temperature Ranges from -65 F [-54 C] to +160 F [71 C]

Use this material when you need a premium matte finished paper stock. Good for most indoor product labeling.This product will exhibit better print quality when compared to our bright white papers.

White Classic Crest Wet-strength (Permanent/Removable Adhesive) [Stock #1788] 4.7 mil smooth uncoated creamy-colored paper resembling parchment, wet strength paper facestock produced for, but not limited to, wine and drink bottle applications. Material and ink finish matte. The adhesive is a permanent adhesive that is removable in a minimum of 100 F [-38 C] degree water. Temperature Ranges: Labeling Temperature +20 F [-7 C]. Service Temperature Ranges from -65 F [-54 C] to +200 F [+93 C].

Use this material when you need an inexpensive indoor matte facestock with a parchment look and greater strength when wet, you are not concerned about moisture, but the product needs to be frozen or refrigerated. Examples: water bottles, juice, wine labeling.

Fluorescent Paper in Chartreuse, Pink, Red, Green, Orange (Permanent Adhesive) [Stock #2002 chartreuse, #1423 pink, #2003 red, #1821 green, #1820 orange] 3.8 mil fluorescent papers. These materials work great for indoor applications needing fluorescent colors. Use black ink to create text labels but will accept all other colors. If printing color on these materials, an $80 press proof is suggested due to color changes caused by the materials color. The adhesive is a modified acrylic with good adhesion to all normal substrates, including non-polar surfaces, films and corrugated board. Good low temp performance as well. Temperature Ranges: Labeling Temperature min 32 F [0 C], Service Temperature Range -4 F [-20 C] to 176 F [80C].

Use fluorescent paper to grab attention and when application is for indoor use. Examples: Eye-catching labeling for price marking, promotional use and information labels printed on lasers and copier.

Gold Foil Paper (Permanent Adhesive) [Stock# 115] - 2.7 mil premium mirror finish, bright gold metalized paper for indoor use with a modified acrylic topcoat. All colors of inks show up; inks are transparent so entire label will have shine even where area has inks. If printing color, an $80 press proof is suggested to make sure final product is to your specifications. The adhesive is rubber-based and features high initial tack and ultimate bond strength to a wide variety of substrates, including low surface energy plastics, treated glass and corrugated. Temperature Ranges: Labeling Temperature min 25 F [-4 C], Service Temperature Ranges -65 F [-54 C] to 160 F [71 C].

Use gold foil paper for flash and looks on indoor labels. Examples: applications requiring a deluxe appearance of metalized paper. Markets include: food, cosmetic, toiletries, beverage and more

Silver Foil Paper (Permanent Adhesive) [Stock# 220] .9 mil mirror finish, bright silver metalized paper for indoor use. All colors of ink show up; inks are transparent so entire label will have shine even where area has ink. The adhesive is an all-temperature adhesive developed to provide good room temperature performance and excellent cold temperature performance without sacrificing good diecutting and stripping properties. Because of its cold-temperature properties and good adhesion to corrugated cardboard, this adhesive is an ideal adhesive for warehouse applications. Temperature Ranges: Labeling Temperature min -20 F , Service Temperature Ranges -65 F to 200 F.

Use silver foil paper for flash and looks on indoor labels. Examples: applications requiring a deluxe appearance of metalized paper. Markets include: food, cosmetic, toiletries, beverage and more.

Estate #4 [Stock #1709] 5.1 mil bright white, vellum finish, wet strength, high quality label paper for wine and beverage applications where image is as important as performance. Designed for roll-to-roll applications. Adhesive is a general purpose, permanent adhesive with water wash off characteristics. Good adhesion to dry and cold bottles, offers good water resistance in ice bucket immersion. Water wash off at 110 F [43 C] for label removal. Temperature Ranges: Labeling Temperature min 32 F [0 C], Service Temperature Ranges -4 F [-20 C] to 176 F [80 C]. Rougher texture and not as bright as Estate #8. This material has an antique, matte finish and is specially made for wine bottle labels. We suggest that you call for samples.

Estate #8(Permanent Adhesive) [Stock #1710] 4.8 mil bright White, vellum finish, wet strength label paper. High quality label paper for wine and beverage applications where image is as important as performance. Designed for roll-to-roll applications. Adhesive is a general purpose, permanent adhesive with water wash off characteristics. Good adhesion to dry and cold bottles, offers good water resistance in ice bucket immersion. Water wash off at 110 F [43 C] for label removal. Temperature Ranges: Labeling Temperature min 32 F [0 C], Service Temperature Ranges -4 F [-20 C] to 176 F [80 C]. Smoother and a little brighter white than Estate #4.

This material has an antique, matte finish and is specially made for wine bottle labels. We suggest that you call for samples.

Estate #9(Permanent Adhesive) [Stock #1711] 5.4 mil cream, laid finish, wet strength label paper. High-quality label paper for wine and beverage applications where image is as important as performance. Adhesive is a general purpose, permanent adhesive with water wash off characteristics. Good adhesion to dry and cold bottles, offers good water resistance in ice bucket immersion. Water wash off at 110 F [43 C] for label removal. Temperature Ranges: Labeling Temperature min 32 F [0 C], Service Temperature Ranges -4 F [-20 C] to 176 F [80 C]. Has more recycled look characteristics, more of a brown tone than Estate #4 and #8.

This material has an antique, matte finish and is specially made for wine bottle labels. We suggest that you call for samples

UL APPROVED

White Gloss Polyester (Permanent Adhesive) [Stock #408] - UL recognized under UL 969 UL File No. PGJ12.MH16635 Printing Materials Component. This 2 mil gloss topcoated white polyester provides consistent surface smoothness, excellent dimensional stability and endurance to varying temperatures. Material is coated with an aggressive, permanent acrylic adhesive and backed with a 50 lb. bleached kraft roll form release liner. Gloss topcoat resists smudging and abrasion when printed with resin and wax/resin thermal transfer ribbons. Permanent pressure-sensitive acrylic adhesive bonds well to low and high-surface energy plastics, metal, powder coated paint, paint, ceramic, paper/fiber, glass and fiberglass. Temperature Ranges: Labeling Temperature min +50 F [10 C], Service Temperature Ranges from -40 F [-40 C] to 302 F [150 C]. Use this gloss topcoated white polyester material for appliance and compliance labeling when critical information regarding product model numbers and specifications are needed; product or parts identification, authentication and tracking, inventory control, product identification, lab specimen tracking, microscope slide tacking and diagnostics, or any high-quality label that needs to resist a variety of environmental stresses while providing critical combination of durability, aesthetic appeal and efficiency.

White Matte Polyester (Permanent Adhesive) [Stock #229] - UL recognized under UL 969 UL File No. PGJ12.MH16635 Printing Materials Component. CUL recognized under UL file No. PGG18.MH16635 Printing Materials Certified for Canada Component under CAN/CSA standard C22.2, No. 0.15. This 2 mil matte topcoated white polyester provides consistent surface smoothness, excellent dimensional stability and endurance to varying temperatures. Material is coated with an aggressive, permanent acrylic adhesive, and backed with a 50 lb. bleached kraft roll form release liner. Matte topcoat film designed for cross-technology printability via impact, laser, electron beam, wax, resin and wax/resin thermal transfer ribbons. Topcoat provides excellent resistance to chemicals, moisture, smudging and scratching. Permanent pressure-sensitive acrylic adhesive bonds well to low and high-surface energy plastics, metal, powder coated paint, paint, ceramic, paper/fiber, glass and fiberglass. Temperature Ranges: Labeling Temperature min +50 F [10 C], Service Temperature Ranges from -40 F [-40 C] to 302 F [150 C]. Use this matte topcoated white polyester material when you need a cross-technology printable material. Use for compliance labels for consumer electronics containing critical information regarding product model numbers and specifications, or any high-quality label that needs to resist a variety of environmental stresses while providing critical combination of durability, aesthetic appeal and efficiency.

Clear Gloss Polyester (Permanent Adhesive) [Stock #1941] - UL recognized under UL 969 UL File No. PGJ12.MH16635 Printing Materials Component. This 2 mil gloss topcoated clear polyester provides consistent surface smoothness, excellent dimensional stability and endurance to varying temperatures. Material is coated with an aggressive, permanent acrylic adhesive and backed with a 50 lb. bleached kraft roll form release liner. Topcoat resists smudging and abrasion when printed with resin and wax/resin thermal transfer ribbons. Permanent pressure sensitive acrylic adhesive bonds well to low and high surface energy plastics, metal and powder coated paint. Temperature Ranges: Labeling Temperature min +50 F [10 C], Service Temperature Ranges from -40 F [-40 C] to 302 F [150 C]. Use this clear gloss polyester when you need compliance labels for appliances containing critical information regarding product model numbers and specifications or any high-quality label that needs to resist a variety of environmental stresses while providing critical combination of durability, aesthetic appeal and efficiency.

Clear Matte Polyester (Permanent Adhesive) [Stock #984] - UL recognized under UL 969 UL File No. PGJ12.MH16635 Printing Materials Component. CUL recognized under UL file No. PGG18.MH16635 Printing Materials Certified for Canada Component under CAN/CSA standard C22.2, No. 0.15. This 2 mil matte topcoated clear polyester provides consistent surface smoothness, excellent dimensional stability and endurance to varying temperatures. Material is coated with an aggressive, permanent acrylic adhesive and backed with a 50 lb. bleached kraft roll form release liner. Matte topcoated film is designed for cross-technology printability via impact, laser, electron beam, wax, resin and wax/resin thermal transfer ribbons. Topcoat provides excellent resistance to chemicals, moisture, smudging, and scratching. Permanent acrylic pressure sensitive adhesive bonds well to low and high surface energy plastics, painted metal, powder-coated paint, polycarbonate and fiberglass. Temperature Ranges: Labeling Temperature min +50 F [10 C], Service Temperature Ranges from -40 F [-40 C] to 302 F [150 C]. Use this matte topcoated clear polyester when you need a cross-technology printable material. Use for warning and instructional labels that contain critical information, appliance brand identity labels or any high-quality label that needs to resist a variety of environmental stresses while providing critical combination of durability, aesthetic appeal and efficiency.

Silver Gloss Polyester (Permanent Adhesive) [Stock #424] - UL recognized under UL 969 UL File No. PGJ12.MH16635 Printing Materials Component. This 2 mil gloss topcoated silver gloss polyester provides consistent surface smoothness, excellent dimensional stability and endurance to varying temperatures. Material is coated with an aggressive, permanent pressure-sensitive acrylic adhesive, and backed with a 50 lb. bleached kraft roll form release liner. Topcoat resists smudging and abrasion when printed with resin and wax/resin thermal transfer ribbons. Permanent acrylic pressure-sensitive adhesive bonds well to low- and high-surface energy plastics, painted metal, powder-coated paint, polycarbonate and fiberglass. Temperature Ranges: Labeling Temperature min +50 F [10 C], Service Temperature Ranges from -40 F [-40 C] to 302 F [150 C]. Use this gloss topcoated silver polyester when you need a conventional and thermal transfer material. Use for appliance labels containing critical information regarding product model numbers and specifications; automotive, industrial, electronic parts identification, authentication and tracking, inventory control, agency recognition, or any high-quality label that needs to resist a variety of environmental stresses while providing critical combination of durability, aesthetic appeal and efficiency.

Silver Matte Polyester (Permanent Adhesive) [Stock #255] - UL recognized under UL 969 UL File No. PGJ12.MH16635 Printing Materials - Component. CUL recognized under UL file No. PGG18.MH16635 Printing Materials Certified for Canada Component under CAN/CSA standard C22.2, No. 0.15. This 2 mil matte topcoated silver matte polyester provides consistent surface smoothness, excellent dimensional stability and endurance to varying temperatures. Material is coated with an aggressive, permanent acrylic pressure-sensitive adhesive, and backed with a 50 lb. bleached kraft roll form release liner. Topcoat film is designed for cross-technology printability via impact, laser, electron beam, wax, resin and wax/resin thermal transfer ribbons, and provides excellent resistance to chemicals, moisture, smudging and scratching. Permanent acrylic pressure-sensitive adhesive bonds well to low- and high-surface energy plastics, painted metal, powder-coated paint, polycarbonate and fiberglass. Temperature Ranges: Labeling Temperature min +50 F [10 C], Service Temperature Ranges from -40 F [-40 C] to 302 F [150 C]. Use this matte topcoated silver polyester when you need a cross-technology printable material. Use for appliance and compliance labels containing critical information regarding product model numbers and specification, or any high-quality label that needs to resist a variety of environmental stresses while providing critical combination of durability, aesthetic appeal and efficiency.

ENVIRONMENTAL

Natureflex (Permanent Adhesive) [Stock# 1732] - Our answer to your environmental sensitive projects. This 1.8 mil film is ideal for use in sustainable material applications for the whole packaging construction. This white synthetic material is a fully biodegradable and compostable film for labeling. Manufactured with a permanent acrylic adhesive that offers high initial tack, which adheres to a wide variety of surfaces and offers outstanding wet-out. Temperature Ranges: Labeling Temperature min 40 F [4 C], Service Temperature Ranges -40 F [-40 C] to 160 F [71 C].

Use this material when you need a sustainable facestock with good strength when wet. Examples: environmental conscience product labeling.

TAG STOCK

6 Mil Synthetic All Weather Tag (No Adhesive) [Stock# 1921] 6 mil bright white synthetic tag with great durability for outdoors use. Good for lumber, steel, plant tags and any other application that may need a durable indoor/outdoor tag. Thermal transfer printable if not printing over any ink. Can be produced with air eject holes, notches at perforations, and is finished in sheets or rolls.

Use this material when you have an outdoor application and do not want an adhesive. Stock is thicker than paper, but thinner than cardboard. Example: nursery tags.

7 Mil White TTR Paper (No Adhesive) [Stock# 1706] - 7mil. thermal transfer tag, matte-coated thermal transfer paper tag. Multipurpose tag stock with engineered thermal transfer-receptive coating for paper tag and ticket applications.

Use this material for indoor use and when you do not want an adhesive. Stock is thicker than paper, but thinner than cardboard. Example: product tags, tickets.

8 Mil Synthetic All Weather Tag (No Adhesive) [Stock# 1716] 8 mil bright white synthetic tag with great durability for outdoors use. Good for lumber, steel, plant tags and any other application that may need a durable indoor/outdoor tag. Thermal transfer printable if not printing over any ink. Can be produced with air eject holes, notches at perforations, and is finished in sheets or rolls.

Use this material when you have an outdoor application and do not want an adhesive. Stock is thicker than paper, but thinner than cardboard. Example: nursery tags.